The Classic Drop Spreader is ideal for distributing grass seed or (uncoated) fertilizer over large lawns. This spreader has a plastic hopper that can hold enough fertilizer (32 kilos) for up to 950m2. It equally distributes the grass seed or (uncoated) fertilizer over a 55cm area; maximum coverage with less refilling.

Its heavy-duty frame allows for great stability and its U-shaped, gripped handle make for easy steering. This product comes fully assembled and ready to use.

Below are instructions on how to calibrate an ICL Classic Drop Spreader.

Turn the adjustment mechanism to the number 6. This mechanism is located along the vertical metal shaft of the handlebars. Turn the spreader over so that the handle is on the ground. Hold the spreader with both hands, tire side up.

Engage the black plastic trigger on the handlebars with your foot to open the gate. When the trigger is fully depressed, it is parallel to the handlebars. The leading edge of the shutoff bar should be aligned with the calibration line engraved into the bottom of the hopper (plastic storage bin of the spreader).

Adjust the alignment by turning the black calibration screw at the lower edge of the "control wire" with a wrench. The "control wire" is the cable that runs from the trigger on the handlebars to the gate at the bottom of the hopper. Adjust the screw until the leading edge of the shutoff bar is aligned with the calibration line.